Skip to content
Illustration of a television in a lounge showing a street scene, used for TV audio troubleshooting

Why Is Your TV Sound Out of Sync?

TV sound that does not match the picture is usually a timing problem somewhere between the programme, television, streaming device and speakers. The quickest solution is to identify which connection introduces the delay before changing settings. Test the same scene using the TV's own speakers, then reconnect your soundbar or headphones one device at a time.

First identify whether sound is early or late

Watch a close-up of someone speaking and compare lip movement with the sound. If you hear the voice after the mouth moves, the sound is late. If you hear the voice before the mouth moves, the sound is early. That distinction determines whether an audio-delay setting can help.

Most audio-delay controls add a further delay rather than making delayed sound arrive earlier. Increasing delay is therefore useful when sound is ahead of the picture, not normally when the sound is already late. If the sound is late, first reduce processing or switch the connection path. Before adjusting anything, write down the current TV and soundbar settings so you can reverse changes easily.

Try a second programme, preferably a live television source and a built-in streaming app. If the problem happens only in one video, recording or channel, the original content may be at fault. A delay that occurs on every source points more strongly towards the audio route or general settings.

Run a direct TV-speaker comparison

  1. Pause any streaming and note which programme shows a clear lip-sync error.
  2. Open the television's audio output menu and select its internal speakers.
  3. Replay the same programme or scene and listen again.
  4. If lip sync is correct through the TV but wrong through the soundbar, investigate the soundbar connection, processing modes and audio-format settings.
  5. If the TV's own speakers are also wrong, test a different app or input before blaming the speaker equipment.

Some televisions retain different sound settings for different inputs. Record both the source device and the input name when testing. If another household member has changed the sound mode, select a normal or standard mode and retest before factory-resetting equipment.

Check HDMI ARC, eARC and optical connections

HDMI ARC and eARC carry audio back from a compatible television to a soundbar or receiver. The soundbar must use the appropriate HDMI connection and the television's designated ARC/eARC port. Ordinary HDMI inputs on a soundbar do not necessarily provide the same function. Check the exact labels and manuals rather than assuming that any HDMI socket is interchangeable. For a closer explanation, read HDMI 2.1, eARC and VRR explained. HDMI-CEC, sometimes called Anynet+ (Samsung), SIMPLINK (LG) or BRAVIA Sync (Sony), may also affect how compatible connected devices select and control the audio route.

Remove and reseat accessible cables while equipment is powered down if the manufacturer's instructions recommend doing so. Avoid pulling a television away from a wall mount or reaching near live wiring. If the connection is unstable, try a known-good suitable cable. Cable replacement will not automatically cure a consistent delay that is created by video processing or audio format conversion.

An optical digital audio connection can be a useful comparison where both devices support it. It has different audio-format capabilities from eARC, so choose an output format supported by the equipment. If the television offers PCM and Dolby Digital/bitstream or passthrough options, change one setting at a time and compare the same scene. PCM can be a useful comparison when a device's Dolby Digital decoding or conversion introduces a delay. Do not assume that switching to PCM preserves every surround-sound format.

Audio sync controls: what to change and what to avoid

Many televisions and soundbars provide an Audio Sync, Lip Sync or Digital Audio Output Delay option. The location, available range and supported connections vary by model. Samsung New Zealand's audio-delay guidance describes several control methods, including a selectable sync adjustment, while noting that controls differ between products. On some compatible Samsung soundbars the SYNC setting allows an additional delay from 0 to 300 milliseconds; this is not a universal range or a way to speed up already-late audio.

Start with the delay set to zero or the recorded original value. If the audio is ahead of the picture, increase the delay by a small amount and replay the same short scene. If sound is behind the picture, avoid continually adding delay; investigate wireless transmission, processing and connection routing instead. Restore the previous value when a change makes things worse.

Some televisions also have a setting named Auto Lip Sync or a sound-processing feature that may help with supported equipment. These capabilities depend on the combination of TV, source and speaker. Consult the relevant user manuals before enabling several options simultaneously, because overlapping settings can make the root cause difficult to identify.

Brand-specific audio sync settings: Samsung, LG and Sony

Menu names depend on the TV model and software version. Use these manufacturer-documented paths as starting points, not as instructions that apply to every television. Before changing a setting, photograph its original value and replay the same short speech scene afterwards.

  • Samsung TVs: On supported models open Settings > Sound > Expert Settings > Digital Output Audio Delay. Samsung New Zealand recommends changing this slider when sound is ahead of the picture. Its separate Digital Output Audio Format setting may offer PCM, Auto or Pass-Through, depending on the connected devices. See Samsung NZ audio-delay troubleshooting and Samsung NZ audio-format settings.
  • LG TVs: On many newer webOS versions, try All Settings > Sound > Advanced Settings > Match Screen and Sound, then compare Bypass with the previous setting. If necessary, turn Bypass off and adjust the TV Speaker Delay. Older models may show AV Sync Adjustment instead. See LG's audio-sync guide.
  • Sony BRAVIA TVs: Look under Settings > Display & Sound > Audio Output > A/V sync or the equivalent model-specific path. Depending on the symptom, compare Auto, On or Off, and test the digital output mode separately. See Sony New Zealand's HDMI and soundbar sync guidance.

JBL Bar 500 MK2 example: JBL confirms that this model has an audio-sync adjustment, including via the JBL One app. JBL describes a 0–250 ms delay setting; this adds delay when the sound is early and cannot normally make already-late sound arrive sooner. See JBL's model-specific explanation.

Streaming device, app and broadcast tests

Try playing the same kind of content from the television's built-in app rather than an external streaming box. If the built-in app is correct but the HDMI-connected box is delayed, check the box's audio output mode and any matching settings on the TV. If only a downloaded video file is wrong, its audio track, playback software or unsupported encoding may be responsible.

Reboot the affected streaming device if it is behaving unpredictably, then confirm whether the delay returns. Firmware and software updates can fix known compatibility issues, but use the supported update process and allow the equipment to finish normally. Do not install unofficial software or change unrelated network settings as a speculative solution.

According to Samsung New Zealand's TV audio-delay troubleshooting, testing a built-in app against an external source can help isolate whether the problem lies with the source signal or the external connection. Treat this as a diagnostic method, not proof that every Samsung, Panasonic, LG or other television exposes identical controls.

Sony HT-S100F black two-channel soundbar with HDMI ARC and optical input
The Sony HT-S100F offers HDMI ARC and optical connections for comparing TV audio routes. Check your TV's own sync settings separately.

New Zealand broadcast, Sky and Freeview checks

To identify a source-specific problem, compare the same type of programme using a built-in TV app, a Freeview broadcast if available, and any Sky box or other set-top box connected by HDMI. If only one channel is affected, try another channel and note the time before changing equipment. If all channels from one box are delayed but the built-in app is correct, test the box's audio-output option, HDMI input and TV audio routing individually. Do not assume that a broadcast fault can be cured with a new soundbar.

For a gaming console or set-top box, compare PCM stereo with a supported Dolby Digital/bitstream mode as a diagnostic test. PCM can reduce the need for an additional decode step in some configurations, but may change surround-sound output. Game Mode or Auto Low Latency Mode (ALLM) can change the picture-processing path, so compare lip sync and picture quality together. Restore the original settings after unsuccessful tests.

Why Bluetooth headphones can make lip sync harder

Wireless audio normally needs encoding, transmission and decoding, all of which introduce some latency. Different headphones, TVs and Bluetooth transmitters can behave differently, and the codec used must be supported at both ends. A claim on one accessory's packaging does not guarantee that every connected television will use the same low-latency mode.

Try wired listening through an appropriate TV audio output as a diagnostic comparison if both the equipment and manufacturer instructions permit it. If wired audio matches the picture and Bluetooth is late, the wireless link is the likely contributor. A dual-listener transmitter can also add its own latency, so test both connected headphones rather than assuming their delays are identical. Check the AAC, aptX and LDAC codec guide for the role of codecs. aptX Low Latency is relevant only if both the transmitter and receiving headphones support it.

Do not buy a replacement transmitter on the assumption that a specific latency figure will work across the entire setup. Verify output format, pairing support, headphone codecs and whether the TV allows simultaneous speaker playback. The practical goal is listening that remains in sync with the actual screen, not a claimed technical feature in isolation.

Should you replace the soundbar or cable?

Usually not until you have isolated the fault. If a soundbar is correct on one input and delayed on another, the equipment has demonstrated that it can perform correctly in at least one configuration. That makes settings and signal routing worth investigating before buying anything.

When comparing new products, check supported TV connection methods, HDMI ARC/eARC requirements, optical input availability, audio formats and whether the product provides an adjustable sync control. A basic soundbar may be entirely suitable for ordinary television dialogue, while a more complex surround system introduces additional processing and compatibility considerations.

Use the soundbar buying guide to compare connection options and features. For a simple 2.0-channel option, the Sony HT-S100F has HDMI ARC and optical input. If you want a separate subwoofer, the JBL Bar 500 MK2 has HDMI eARC, optical input and model-specific audio synchronisation controls. The Bose TV Speaker is another compact option. Check the exact device pairing and controls before buying; no soundbar can be assumed to fix a delay originating elsewhere. Browse the current soundbar collection for further choices. If the problem is missing sound rather than delayed sound, follow Why Is There No Sound from Your Soundbar? instead.

JBL Bar 500 MK2 black soundbar and wireless subwoofer
The JBL Bar 500 MK2 includes a wireless subwoofer and HDMI eARC and optical inputs. It also offers model-specific audio synchronisation controls.

A repeatable before-and-after test

Choose one source that clearly displays speech, set the same picture and sound modes, and play a short scene through the TV speakers. Then test the same scene through the external audio system. Record which source, output setting and connection produced the error.

Change only one setting at a time. After each change, replay both dialogue and a scene with sharp sound effects. A setting that helps one broadcast but ruins another may not be a robust solution. Where a source device has its own delay setting, check whether you have accidentally applied delay in both the TV and the soundbar.

If the picture is delayed by heavy image processing, Game Mode or Auto Low Latency Mode (ALLM) may alter timing, but it can also affect image appearance and other features. Compare carefully and restore the original mode if it does not help. If you still cannot get reliable sync, gather exact device model numbers, firmware versions and the results of your tests. If a reasonably recent TV or soundbar purchased from a New Zealand business appears faulty, contact the retailer first. Under the Consumer Guarantees Act, you may be entitled to a free repair, replacement or refund depending on the fault and circumstances. You generally do not need to approach the manufacturer before the retailer.

Frequently asked questions

Why is the audio behind the lips on my TV?

The sound may be delayed by wireless transmission, an external audio device or processing settings. Test the built-in TV speakers against the external system to narrow down the cause.

Will a new HDMI cable always fix lip sync?

No. A faulty or unsuitable cable can cause connection problems, but it does not address every source or audio-processing delay.

Is ARC better than optical for lip sync?

Neither connection guarantees perfect timing. Their supported audio features differ, and the actual result depends on your television, speaker and source configuration.

Can a TV audio-delay control make sound arrive earlier?

Many controls only add delay. If sound is already late, first reduce other processing or change the audio route.

Does Bluetooth add delay when watching television?

It can. Latency varies with the devices, codec and transmission path. Check the exact combination rather than relying on a general Bluetooth label.

Bose TV Speaker compact black soundbar
The Bose TV Speaker is a compact alternative designed for dialogue. Verify the exact TV inputs and sync controls before buying.

Compare TV audio options

Start with direct speaker and source tests before replacing equipment. If a different connection or soundbar is genuinely needed, compare current soundbars at Tech Supply Shed for compatible inputs, formats and controls. Always use the exact manufacturer manual to confirm suitability.

Search

Cart

Your cart is empty.

Unfortunately we could not find any products in your cart.

Continue shopping