Panasonic EYC217LJ2G57 Cordless 18v Hammer Drill & Impact Driver Combo Kit

Save $204.00
PanasonicSKU: EYC217LJ2G57

Price:
Sale price$765.00 NZD Regular price$969.00 NZD

Tax included

Stock:
Only 1 unit left

Description

Panasonic EYC217LJ2G57 Cordless 18v Hammer Drill & Impact Driver Combo Kit

  • Dual Voltage (14.4v or 18v)
  • 5.0Ah Li-Ion Battery
  • Tough Tool IP rating

The EYC217LJ2G57 kit includes:

  • x1 EY79A2 (Body): 18V/14.4V Hammer Drill & Driver
  • x1 EY75A7 (Body): 18V/14.4V Impact Driver
  • x2 EY9L54B: 18V 5.0Ah Li-Ion battery pack.
  • x1 EY0L82B: Battery Charger

Key Features:

Extreme Durability

EY79A2 is equipped with a new brushless motor which helps make the tool last twice as long compared to tools with brush motors. Its new ultra-hard chuck jaw tips are brazed into each jaw giving strength and helping reduce wear. Plus, the new hybrid semi-electronic switch helps eliminate heavy friction to internal parts of the switch and it also allows for smoother operation. 

Powerful to the Finish

The new large brushless motor delivers a high-speed and powerful performance. The newly designed control circuit increases stable current flow to the motor by more than 70%* enabling the high-power output to be evenly maintained until the task has been completed, even during high-load operation. 

*Compared with previous brushless motor.

Increased Efficiency and Flexibility

The new "speed control function" lets you choose from three different low rotation speed settings (high medium and slow) based on allowable maximum speeds for metal hole saws. It greatly reduces "run out" when using metal hole saws and prevents surface scorching on stainless steel and other materials.

New Advance Speed Control

New advanced speed control electronics start rotation speed gradually. This enables slow and smooth starts allowing for ultimate control when you start drilling or working with small screws in precise applications. 

Advanced Ergonomics

With EY75A7, you'll achieve high-power with optimum centre-balanced ergonomics thanks to its compact design and shorter brushless motor. It's also incredibly comfortable to use, even in narrow spaces. 

Multiple Modes for a Variety of Applications

The Impact driver has four different loads:
  • Hard: Fastening long bit and bolts.
  • Medium: fastening for furniture
  • Soft: fastening for plaster board
  • Self-Drilling Screw Mode: This new mode starts at the highest speed to cut the hole, and then it transfers to High-Impact for power. It then automatically switches to a slower mode.  

Robust Design for Heavy-Duty Use

Powerful and compact, the new brushless motor delivers approx. 200% more life cycles. Plus, a thicker motor shaft ensures more strength for heavy-use. EY75A7 uses rigid metal parts in the switch to increase durability and decrease wear.  
Specifications
EY79A2LJ2G57 Max. Torque 32.0 N-m Stalling torque, 50.0 N-m Instand torque
Speed at No Load Low 30-470 min-1 (rpm)
High 70-1580 min-1 (rpm)
Blows Rate per Minute Low 540-8,500 bpm
High 1,2060-28,400 bpm
Clutch Torque 1.0-4.4 Nm (0.2 Nm per stage, total 18 stage)
Charging Time (using EY0L82B charger) Usable 65 minutes
Full 80 minutes
Weight (including battery) 2.10 kg
Size (LxHxW) 188mm x 250mm x 68mm
Max. Drill Diameter In Wood ᴓ38 mm
In Metal ᴓ13 mm
Max. Screws Driving Wood screw ᴓ8 mm
Self-drilling screw ᴓ6 mm
EY75A7LS2F57 Charging Time (using EY0L82B charger) Usable 65 minutes
Full 80 minutes
Weight (including battery) 1.70 kg
Size (LxHxW) 118mm x 242mm x 66mm
Max. Torque High/Hard Mode 160 Nm
Medium Mode 130 Nm
Low/Soft Mode 26 Nm
Self-drilling screw Mode 130 Nm
Speed at No Load High/Hard Mode 0-2500 rpm
Medium Mode 0-1450 rpm
Low/Soft Mode 0-950 rpm
Self-drilling screw Mode 0-2500 rpm
Impact/min High/Hard Mode 0-3100 ipm
Medium Mode 0-2900 ipm
Low/Soft Mode 0-1900 ipm
Self-drilling screw Mode 0-1200 ipm
NOTE * Comes with a battery charger (EY0L82B57) and carrying case
Also comes with 2 x 18V 5Ah batteries, charger (EY0L82B57) & carry case

 

Delivery

Expected delivery times;

 - North Island 1-5 workings days

- South Island 5-10 working days

Expected Delivery Times

North Island - 2-6 Working Days

South Island - 3-10 Working Days

You may also like

Recently viewed