ONKYO TXNR696 MK2 7.2 Channel 2 Zone AV Receiver. HDMI 7 in, 2 out, Dolby Atmos & DTS:X reproduction. HDMI 4K@60Hz support. Dimensions - 435 x 173.5 x 379.5mm Weight - 10 kg. Colour - Black
Future-ready home entertainment with THX® Certified Select™
A harmonious mix of tech and tradition, the TXNR696 adapts to entertainment life and finds the emotion in every sound source, from 3D film scores to vinyl records. SMART AV Receiver™ gathers Chromecast built-in*1, Works with Sonos, AirPlay 2, and DTS Play-Fi® with streaming services for smooth multi-room audio evolved by support for the new high-speed 802.11ac (2x2 MIMO) Wi-Fi® specification*2. Dolby Atmos® and DTS:X® pull audiences deep into movies and games, THX Certified Select assuring a theatre-reference experience. If a 5.2.2-ch setup isn’t possible, Dolby Atmos Height Virtualizer*3 and DTS Virtual:X™*3 can create a 3D sound field from horizontal speaker layouts. Separate Zone 2 outputs with switching also enable 7-ch layouts in Main plus Zone 2 speakers. With a revitalized DAA system, 4K/60p/HDR HDMI® terminals, and many extras, this product excels in every aspect.
*1 The unit may automatically download and apply an Over-the-Air software update during setup. *2 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. *3 Enabled with a future firmware update.
FEATURES
- 210W/Ch THX® Certified Select™ DAA system
- SMART AV Receiver™ Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®,
- Amazon Music, Pandora®, TIDAL, Deezer, TuneIn*3
- Supports 5.2.2-ch Dolby Atmos® and DTS:X® playback
- Dolby Atmos Height Virtualizer*4 and DTS Virtual:X™*4
- Refined HDMI® grounds, separate SoC board, enhanced power amps
- HDMI Sub/Zone 2 output shares media with a second display or projector
- Quad-core SoC supports 802.11ac (2x2 MIMO)
- Wi-Fi® specification*5
- Zone 2/Zone B line-out with DAC shares D/A audio (including HDMI/SPDIF*6)
- Separate Zone 2 outputs distribute D/A audio sources (including HDMI/SPDIF*6)
- Stereo Assign Mode to switch Front playback to Height channels
- DSP-based Vocal Enhancer improves dialogue audibility
- GUI with OSD via HDMI features media input/output data display function
- HDMI supports 4K@60Hz, 4K HDR, 4:4:4/24-bit, BT.2020, HDCP 2.2
- AccuEQ Advance with AccuReflex™
- One-touch volume memory presets for A/V inputs
Specifications
t (All channels) |
210W/Ch |
(6Ω, 1kHz, 10% THD, 1-ch driven) |
|
100W/Ch |
|
(8Ω, 20Hz~20kHz, 0.08% THD, 2-ch driven, FTC) |
|
Dynamic power |
240W (3Ω, Front) |
210W (4Ω, Front) |
|
120W (8Ω, Front) |
|
THD+N (Total Harmonic Distortion + Noise) |
0.08% (20Hz~20kHz, half power) |
Input sensitivity and impedance |
200mV rms/47kΩ (Line) |
3.5mV rms/47kΩ (Phono MM) |
|
Rated RCA output level and impedance |
1V rms/470Ω (Subwoofer pre-out) |
200mV rms/2.3kΩ (Zone B/Zone 2 line-out) |
|
Frequency response |
10Hz~100kHz/+1dB, -3dB (Direct Mode) |
Tone control |
±10dB, 20Hz (Bass) |
±10dB, 20kHz (Treble) |
|
Signal-to-noise ratio |
106dB (Line, IHF-A) |
80dB (Phono, IHF-A) |
|
Speaker impedance |
4Ω~16Ω |
Tuner Section |
|
Tuning frequency range |
FM 87.5MHz~108MHz |
AM 522kHz~1,611kHz |
|
General |
|
Power supply |
AC 220V–240V~, 50/60Hz |
Power consumption |
635W |
No-sound power consumption |
65W |
Standby power consumption |
0.15W |
Dimensions (W x H x D) |
435 x 173.5 x 379.5mm |
Weight |
10.0kg |