EDIMAX 12-Port Surveillance Long Range Gigabit PoE+ Web Smart Switch with 2 Gigabit RJ45 & 2 SFP Ports. Max Power Budget 110W. Supports PoE up to 200m. IEEE 802.3af/at PoE Compliant. IP Surveillance VLAN
Features:
- Supports ONVIF Profile Q standard which is compatible with working ONVIF compliant Profiles G/Q/S/A/C/T/M devices to provide fast and easy system settings, device discovery, and user authentication.
- Guaranteed PoE long distance to 200 meters.
- PoE powered devices (PD) alive check to enhance the reliability of the network. If a PD fails to respond, the GS-5210PL will reboot the PD.
- IEEE 802.3af/at PoE compliant, up to 30W per port (total power budget: 110W) for powering PoE-enabled devices.
- Dual-firmware image for robust failover mechanisms. It can activate the backup firmware right away while the current one faces problems.
- IP Surveillance VLAN and Voice VLAN to enhance video and voice quality.
- 4-digit LED display showing total PoE power, available power, and power consumption.
- Auto-detection of powered devices (PD) and power consumption levels.
- Power backfeed protection to avoid damaging the PoE ports.
- DHCP snooping to protect the integrity of legitimate DHCP server and their operations.
- Supports SNMP v3, Access Control List (ACL), QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunking, IGMP v1/v2/v3 Snooping and Port Mirroring.
Beyond Security | All Fit Together
The EDIMAX ONVIF switches series greatly enhances IP surveillance network systems; it supports the ONVIF Profile Q standard, which is compatible with working ONVIF compliant Profiles G/Q/S/A/C/T/M devices to provide fast and easy system settings, device discovery, and user authentication.
Guaranteed 200 Meters | Going the Distance
While general Ethernet switches have a distance restriction of 100 meters, the GS-5210PL long-range mode provides extended power and data delivery distance to 200 meters (656 ft.) at 10Mbps full-duplex operation on a per-port basis. It's ideal for long-distance applications such as IP cameras, VoIP phones, access points, and PoE-enabled IoT devices at remote locations.
4-digit LED Display | Knowing Instant Power Data
In addition to a web-based GUI to keep track of port power, the GS-5210PL features an intuitive 4-digit LED display showing its power consumption. System integrators can check the total power budget, power consumption per port, and available power left. All with a single hardware select button.
Safe Power Backfeed Protection
Each port is equipped with power backfeed protection to avoid damaging the PoE ports while the non-standard PSE (Power Sourcing Equipments) are connected.
Networking Scenarios
Ports |
10 x RJ45 10/100/1000Base-T Gigabit ports |
2 x SFP uplinks |
Transmission Method |
Store and forward |
Buttons |
Reset button |
LED Indicators |
Per Port: Link/Act, PoE: Act/Status, Per Unit: Power |
Power Input |
100-240V AC, 50-60 Hz, internal power supply |
Total Power Budget |
110W |
Dimensions (L x W x H) |
330 × 230 × 44 mm |
Weight |
2.3kg |
PERFORMANCE |
|
Switching Capacity |
24Gbps |
Forwarding Rate |
17.8Mpps (64-byte package size) |
MAC Address |
8K |
Jumbo Frames |
9K Bytes |
Filtering / Forwarding Rates |
1000Mbps port €“ 1,488,000pps |
100Mbps port - 148,800pps |
10Mbps port - 14,880pps |
POWER OVER ETHERNET |
|
Standard |
IEEE 802.3af (PoE), IEEE 802.3at (PoE+) |
Power Output |
Up to 30W per port |
Pin Assignment |
1/2(+), 3/6(-) End-Span (mode A) |
Management |
PoE status, PoE on/off, PoE PD alive check, per port priority setting |
PoE Long Range |
Guaranteed PoE long range to 200 meters at 10Mbps |
Power Backfeed Protection |
Built-in |
SMART FEATURES |
|
Quality of Service (QoS) |
Rate limiting on packets sent and received by an interface |
Eight queues on each port |
WRR, SP, WRR+SP queue scheduling algorithms |
Re-marking of the 802.1p priority and DSCP priority |
Rate limiting in each queue and traffic shaping on ports |
Class of Service (CoS) |
IEEE 802.1p class of service (SPQ, WRR) |
Port-based CoS |
IP TOS precedence |
802.1p VLAN Information based CoS |
DSCP based CoS |
TCP/UDP Based CoS |
Spanning Tree |
IEEE 802.1d Spanning Tree Protocol (STP) |
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) |
VLAN |
Up to 200 VLANs and 4096 VLAN IDs |
802.1Q tag-based VLAN |
Port-based VLAN |
Surveillance VLAN |
Voice VLAN |
MAC VLAN |
GVRP |
IPV6 |
IPv6 over Ethernet (RFC 2464) |
Dual-stack (RFC 4213) |
ICMPv6 (RFC 4884) |
Neighbor discovery (RFC 4861) |
Auto configuration |
Static IPv6 address and prefix length |
Static IPv6 default gateway |
IPv6 duplicate address detection |
Port Trunking |
IEEE 802.3ad LACP Trunk-Static trunk up to 8 trunk groups |
IGMP Snooping |
IGMP v1/v2/v3 snooping |
Port Mirroring |
Port mirroring both on ingress and egress traffic |
Security |
RADIUS |
AAA |
Management Access |
Authentication Manager |
Port Security |
Protected Port |
Storm Control |
DoS |
Dynamic ARP Inspection |
DHCP Snooping |
IP Source Guard |
Management |
User Interface: Web-based management |
User Account: Login account configuration |
Firmware Upgrade: Firmware upgrade by WEB |
Syslog: Support event log, alarm log and security log |
Temperature |
Operating: 0 ~ 50„ƒ |
Storage: -40 ~ 70„ƒ |
Humidity (Non-condensing) |
Operating: 10 ~ 90% |
Storage: 10 ~ 90% |
Standards |
IEEE 802.3 10BaseT Ethernet |
IEEE 802.3u 100BaseTX Fast Ethernet |
IEEE 802.3ab 1000BaseT Gigabit Ethernet |
IEEE 802.3z 1000BaseSX/LX |
IEEE 802.3af Power over Ethernet (PoE) |
IEEE 802.3at Power over Ethernet (PoE+) |
IEEE 802.3x Full-duplex and flow control |
IEEE 802.1p Quality of Service (QoS) |
IEEE 802.1x Port-based Network Access Control(PNAC) |
IEEE 802.1Q Virtual LANs VLANs |
IEEE 802.1d Spanning Tree Protocol(STP) |
IEEE 802.1w Rapid Spanning Tree Protocol(RSTP) |
IEEE 802.3ad Link Aggregation Control Protocol (LACP) |
IEEE 802.3az Energy Efficient Ethernet |
Certifications |
FCC Class A, CE, ONVIF Compliant |