PoE World GAT-USBC-PD-R2V3 is an Active PoE to USB-C Splitter.

This device provides a powerful solution for delivering power and wired Ethernet data to a USB-C device over up to 100m of network cable.

This splitter allows power to be carried on CAT-5e or CAT-6 network cables using either 802.3at standard or 56 volt passive PoE. 802.3af switches can also be used – but only 12 watts can be delivered without overload. 10/100/1000 or 10/100 switches can be used – the device will negotiate at 10/100 full duplex rates.

Intended for use with any 802.3at PoE switch – this active PoE solution negotiates with the switch to activate power and provide it to the client device. It is a compact and cost effective power solution. The PoE switch needs to supply 48 or 56 volts DC at the source location.

The higher DC voltage means the current is reduced by a factor of 9 compared to 5 volts, and then carried with 90% less loss over the Ethernet cable from the source, the 5v converter at the remote end allows you to extend the charge distance for this application up to 328ft or 100 meters.

PoE World GAT-USBC-PD-R2V3 is an Active PoE to USB-C Splitter.

This device provides a powerful solution for delivering power and wired Ethernet data to a USB-C device over up to 100m of network cable.

This splitter allows power to be carried on CAT-5e or CAT-6 network cables using either 802.3at standard or 56 volt passive PoE. 802.3af switches can also be used – but only 12 watts can be delivered without overload. 10/100/1000 or 10/100 switches can be used – the device will negotiate at 10/100 full duplex rates.

Intended for use with any 802.3at PoE switch – this active PoE solution negotiates with the switch to activate power and provide it to the client device. It is a compact and cost effective power solution. The PoE switch needs to supply 48 or 56 volts DC at the source location.

The higher DC voltage means the current is reduced by a factor of 9 compared to 5 volts, and then carried with 90% less loss over the Ethernet cable from the source, the 5v converter at the remote end allows you to extend the charge distance for this application up to 328ft or 100 meters.